[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Full-Disclosure] Troubles with Wireless pentest



thanks
i may have missed saying that
the better part of the packets going trough the network had local destinations
like lots of netbios queries, smb and the like with the local machines eth addr and ip addr.





From: Filipe Almeida <filipe.almeida@xxxxxxxxx>
To: sammy adedayo <sammyscity@xxxxxxxxx>
CC: bugtraq@xxxxxxxxxxxxxxxxx, full-disclosure@xxxxxxxxxxxxxxxx, vulnwatch@xxxxxxxxxxxxx, zcrips_xrabbitz@xxxxxxxxxxx
Subject: Re: [Full-Disclosure] Troubles with Wireless pentest
Date: Mon, 21 Jun 2004 20:00:55 +0100


Hi,
First, you should get the mac address of the gateway. This is easy,
just look at the destination mac of the outgoing packets or the source
mac of incoming packets.
Then add a static arp entry of an ip of your subnet with that mac
address and use it as the gateway.
Traceroute or record route should get you the real ip of the gateway.

Regards,
Filipe Almeida
http://community.sidestep.pt/~filipe/


----- Original Message ----- From: sammy adedayo <sammyscity@xxxxxxxxx> Date: Mon, 21 Jun 2004 10:41:28 -0700 (PDT) Subject: [Full-Disclosure] Troubles with Wireless pentest To: bugtraq@xxxxxxxxxxxxxxxxx, full-disclosure@xxxxxxxxxxxxxxxx, vulnwatch@xxxxxxxxxxxxx Cc: zcrips_xrabbitz@xxxxxxxxxxx





A little help would be appreciated on this.





       A few problems occurred during a wireless pentest I am
presently undertaking. First a foundation,


1) The pentest was a zero knowledge kind, no information was given, in fact we were forbidden to ask for help from any of the staffs


These I found during the first day.



2) The network had a weak point = its wireless network.



3) The wireless network was encrypted but with the weak wep and for a large corporation the data captured was enough to get the key


4) The network in focus is quite large with multiple subnets and lots of �firewalls�


These I did.



5) Using kismet I sniffed a whole lot of packets. And decoded them with the found wep key


6) Then using my conventional ettercap and ethereal I looked through the packets.


Now The Problem.



7) I tried to connect to the net work



8) I used a nice ip to match those on the network



9) Then I used ettercap to try and passively find the gateway but could not



10) I used etterape to watch the packet flow but I could not figure out the gateway from all that traffic


HELP



HOW CAN I GET THE GATEWAY FOR THE WIRELESS NETWORK AND IS THERE ANY WAY I COULD ROUTE PACKETS TO / CONNECT TO/ SCAN THE REST OF THE MACHINES ON THE NETWORK WITH OUT THE GATEWAYS ADDRESS.





OR IS THERE A BETTER WAY TO DO THE WHOLE PENTEST?


Pls help would be gladly appreciated.



Any ideas are welcome. THANKS�






Zippers crips





The Zcrips Inc


-----------------------------------------------------------------



a man is only limited by his imaginative abilities






                ________________________________
Do you Yahoo!?

Yahoo! Mail - You care about security. So do we.

_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus


_______________________________________________
Full-Disclosure - We believe in it.
Charter: http://lists.netsys.com/full-disclosure-charter.html