RE: Re[2]: [Full-Disclosure] cisco acl

["Keith Pachulski" <keithp@corp.ptd.net>]

Break System
Attach a console to the router.
Power down the router and then power on.
Within the first 30 seconds send a "break" to the router (different emulators 
may have different methods to do this).
You should now have either a ">" prompt or a "rommon 1>" prompt.
Confreg  0x2142
thep i
hit enter

 Wait for the router to finish reloading. Do not enter the configuration dialog 
(i.e. answer no to enter or <ctrl-c>).
 Enable
 Show config

If enable and vty passwords are not encrypted:
 config mem
 conf t
 config-register 0x2102
 <ctrl-z>
 reload

When prompted to save the configuration, say no.
Press enter to continue reloading.

If enable passwords are encrypted:
config mem
conf t
enable {secret  |  password}  <password>
line vty 0 4
password <password2>
config-register  0x2102
<ctrl-z>
write mem
reload
press enter to continue reloading
  
        

-----Original Message-----
From: isa vaul [mailto:nonleft@gmx.net]
Sent: Friday, December 05, 2003 10:31 AM
To: petard
Cc: full-disclosure@lists.netsys.com
Subject: Re[2]: [Full-Disclosure] cisco acl


Hello petard,

Friday, December 5, 2003, 3:35:19 PM, you wrote:

p> On Fri, Dec 05, 2003 at 01:45:31PM +0100, isa vaul wrote:
>> Hello full-disclosure,
>> 
>>   I've got a little problem with a cisco router.
>>   It has obviously been compromised. How do i know, well the password
>>   has changed. So I want to retrieve the ACL from the RAM (not NVRAM)
>>   to see what else maybe got compromised.
>>   Does anyone know how this could be done?
>> 
>>   thanks for any suggestions in advance...
p> You'll probably get better answers if you:

p> 1. google for "cisco router forensics"
p> 2. ask this question to a cisco list
p> 3. ask this question to cisco tech support. they're quite good.

p> Assuming you've determined the changed password and the enable password, the 
command:
p> # show running-config
p> will display the current configuration from RAM, including any ACLs
p> IIRC.

p> HTH,
p> petard

p> --
p> If your message really might be confidential, download my PGP key here:
p> http://petard.freeshell.org/petard.asc
p> and encrypt it. Otherwise, save bandwidth and lose the disclaimer.

thanks for all the replies.
and i am aware of the 3 given possibilities.
but i thought maybe someone on the list has some quick answer as
well?!? and as it is a little urgent i just wanted to give it a try!

Unfortunately I do not know the new password! otherwise there wouldn't
be a problem at all.
and more unfortunately it is not my network and had nothing to do with
the setup.  or else i would have, as Mort pointed out, a tftp in
place.

-- 
Best regards,
 nonleft                            mailto:nonleft@gmx.net

_______________________________________________
Full-Disclosure - We believe in it.
Charter: http://lists.netsys.com/full-disclosure-charter.html

_______________________________________________
Full-Disclosure - We believe in it.
Charter: http://lists.netsys.com/full-disclosure-charter.html